28
Uconnect
™
7” HD LIVE
DISPLAYED
INFORMATION
When a phone is connected to the
system, the display shows various
information (if available):
status of roaming
network signal intensity
mobile phone battery charge
mobile phone name
"Do Not Disturb" function
"Reply With Text Message"
function
To consult the list of mobile phone
devices and supported functions,
visit the www.driveuconnect.eu
website or call Customer Service
on 00 800 0 426 5337 (the number
may vary depending on the country:
please refer to the reference table in
the "Customer Service number list"
section herein).
PAIRING A MOBILE
PHONE
IMPORTANT Carry out this operation
only with car stationary and in safety
conditions; this function is deactivated
when the car is moving.
The pairing procedure for a mobile
phone is described below: always
consult the handbook for the mobile
phone in any case.
To pair the mobile phone, proceed as
follows:
activate the
Bluetooth
®
function
on the mobile phone;
press the "Phone" graphic button
on the display;
if no phone is paired with the
system yet, the display shows a
dedicated screen;
access "Settings" and type
"Add Device" to start the pairing
procedure, then search for the
Uconnect™
device on the mobile
phone;
when prompted by the mobile
phone, use its keypad to enter the
PIN code shown on the system
display or confirm on the mobile
phone the PIN displayed;
during the pairing stage a screen is
displayed showing the progress of
the operation;
when the pairing procedure is
completed successfully, a screen
is displayed: answer "Yes" to
the question to pair the mobile
phone as favourite (the mobile
phone will have priority over
all other mobile phones to be
paired subsequently). If no other
devices are paired, the system
will consider the first associated
device as favourite.
NOTE The priority is determined
according to the order of connection
for mobile phones which are not
set as favourites. The last phone
connected will have the highest
priority.