UCL SWIFT TEK-6, Quick Start Manual

Page: 32 / 36

NORTH AMERICA
Handheld 400x
Inspection Microscope
HFM1
QUICK START GUIDE
The HFM1 Handheld 400x Inspection Microscope is used to inspect fi ber terminations and provide the most
critical view of fi ber end faces. This 400x handheld microscope shows scratches and contamination with its
clear optical performance and integrated laser safety fi lters and is ideal for examining ferrule polish quality.
INTRODUCTION
Three “AAA” batteries included
ACCESSORIES
2.5MM Ferrule 1.25MM Ferrule
Optical Lens Adaptor
INSTALLING
NOTE
Use lens paper and cleaning liquid
to clean the sensor’s surface,
remember to rotate the lens paper
in a clockwise direction.
!
Adaptor Interface
Battery House
LED Switch
Eyepiece
Focus Control
Laser Safety
Light Source Entrance