NORTH AMERICA
Optical Power Meter
OPM1
Performing a test for Insertion Loss (also commonly called dB Loss or Attenuation) on a fiber optic cable requires
an Optical Power Meter (OPM) and an Optical Light Source (OLS). This document outlines the specific steps
which must be taken with OPM1 optical power meter to perform insertion loss testing on a variety of fiber types
and setups.
INTRODUCTION
EXAMPLE 1:
Singlemode Fiber, Point-to-Point, 1 Jumper
Page 2
EXAMPLE 2:
Singlemode Fiber, Point-to-Point, 2 Jumpers
Page 4
EXAMPLE 3:
Singlemode Fiber, Paired, Loopback Jumper
Page 6
EXAMPLE 4:
Multimode Fiber, Point-to-Point, 1 Jumper
Page 8
EXAMPLE 5:
Multimode Fiber, Paired, Loopback Jumper
Page 10
EXAMPLE TESTS
REFERENCE & TEST
GUIDE
Summary of Contents for TEK-6
