5
6
!
CAUTIONS
Use the KF4 only on a stable surface to avoid falls that may cause damage or injury.
The KF4 should be accurately adjusted and treated in alignment. Do not give it a strong shock. Use the
carrying case provided for transporting and storing the KF4 to reduce humidity, vibration and shock.
When replacing the electrodes:
•
Always use UCL SWIFT-approved replacements
•
Ensure correct positioning
•
Always replace in pairs
Failure to follow all warnings and cautions to ensure proper function of the KF4 may result in equipment
damage or a faulty splice.
Use only ethyl alcohol (96% or higher) or other approved cleaning solutions to clean the lens, V-groove, LCD
monitor and main body.
Use the splicer only within the stated operating environmental ranges. Store in a controlled environment to
avoid long-term exposure to damaging temperatures and humidity levels.
The KF4 should receive regular service by a UCL SWIFT-authorized service technician to ensure long-term
functionality and safety.
PRODUCT SPECIFICATIONS AND COMPONENTS
2.1
|
PRODUCT SPECIFICATIONS
CATEGORY
MODEL
Battery
Cleaver blade
Electrode
Transporting case
Work belt
Work table
Sleeve
SOC connector
Alcohol dispenser
External power
Optical fiber holder
KF-3400
BI-07
EI-24
HC-11 (hard case)
WB-01
WK-02
S09-C, S09, S30-C, S30
SC, LC, FC, ST
POM
DC 12V (available for car cigar jack)
HS-250, HS-900, HS-2.5, HS-IN, KF4-SC/FC,
KF4-ST-01, KF4-ILC, LS-900 (choose one)
OPTIONAL ACCESSORIES
STANDARD PACKAGE
* Design, standard/optional package and specification shown above are subject to change with or without notice.
CATEGORY
MODEL
Q’TY
Arc fusion splicer
Battery
Battery adapter
Instructions for use
Spare electrode
Transporting case
Cooling tray
Screw driver
USB cable
Sleeve clamp
Cleaver
Manual stripper
Alcohol dispenser
SWIFT KF4
KF-3400
FY1701000
—
EI-24
Hard case
CT-01 (40mm(1.5in))
LD-3300
—
SC-01
CS-01BT
CF-02
PP
1
1
1
1
1 pair
1
1
1
1
1
1
1
1
CATEGORY
SPECIFICATIONS
DESCRIPTION
Fiber alignment
Applicable type of fibres
Fiber count
Applicable fiber dimensions
Fiber setting and cleaved length
Splicing modes
Typical splice loss
Return loss
Splicing time
Splice loss estimate
Sleeve heating time
Applicable protection sleeve
Storage of splice result
Tension test
Operating condition
Storage condition
Dimension
Weight
Viewing method and display
Fiber view and magnification
Power supply
No. of splice cycles with battery
Electrode life
Blade life
Terminals
IPAAS, Active V-Groove Alignment
SM (G.652; MM (G.651); DS (G.653); NZDS (G.655); SM (G.657 A1, A2/B2, B3)
Single fiber
Cladding diameter: 125�m; Coating diameter: 150�m-3mm
7mm to 16mm (0.28in to 0.63in)
Splice mode: 300; Heat mode: 100
SM: 0.03dB; MM: 0.01dB; DS:0.05dB; NZDS:0.05dB
>60dB
Typical 7 sec. with SM
Available
Typical 13 sec. with IS-60 mode, IS-60 sleeve
40mm (2.4in); 60mm (1.5in) micro sleeve
Data: up to 5,000 ea; Image: up to 5,000 ea
1.96N to 2.25N
Altitude: 0-5,000m above sea level; Temperature: -10ºC~50ºC (-14ºF~122ºF);
Humidity: 0-95%; Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Temperature: -40ºC~80ºC (40ºF~176ºF); Humidity: 0-95%
124(W) x 189(L) x 75(H)mm (without rubber protector)
1.1kg (including battery)
2 AXIS Two CMOS cameras with 109mm (4.3in) color LCD monitor
X/Y: 130X; Max: 260X
Li-ion battery (DC 14.8V, 3400mAh); 100~240V AC charger
Typical 200 cycles
Up to 38,000 splices
Up to 77,000 cleaves
USB
4230 LBJ Freeway, Ste.149 | Dallas, TX 75244
2ɝFH_)D[
LQIR#DPHULFDLOVLQWHFKFRP_ZZZDPHULFDLOVLQWHFKFRP
KF4
Active V-Groove Alignment
BENEFITS AND FEATURES
5HPRWH0DLQWHQDQFHYLDΖQWHUQHW
ΖGHDOIRU(QWHUSULVH'DWD&HQWHU%URDGEDQG
DQG)77+QHWZRUNDSSOLFDWLRQ
9HUVDWLOLW\0$;Ζ080
$FWLYH9*URRYH$OLJQPHQW0HWUR$FFHVV
1HWZRUNDQG)77+ 8QLYHUVDO)LEHU+ROGHUV
6L]H :HLJKW0Ζ1Ζ080
:RUOGȇVPRVWFRPSDFW$FWLYH9*URRYH
)XVLRQ6SOLFHU
(FRQRP\237Ζ080
7KHEHVWTXDOLW\EXGJHWSULFHGPDNH
HYHU\SHQQ\FRXQW
&RPSDWLEOHZLWK)XVLRQ6SOLFH2Q
&RQQHFWRU)62&LQDFFRUGDQFHZLWKWKH
LQGXVWULDOVWDQGDUG
KF4
Fusion Splice-On Connectors
Up to
38,000
ELECTRODE LIFE
Up to
75,000
ROTATING BLADE LIFE
3330 Earhart Drive, Suite 208
|
Carrollton, TX 75006
|
Office: 972.556.0916
|
Fax: 972.910.8384
|
uclswiftna.com
KF4
Rev. 221004R3
CATEGORY
MODEL
Cleaver blade
Electrode
Work belt
Work table
Sleeve
SOC connector
External power
Optical fiber holder
BI-07
EI-24
WB-01
WK-02
S09-C, S09, S30-C, S30
SC, LC, FC, ST
DC 12V (available for car cigar jack)
HS-2.5, HS-IN, KF4-ST-01
OPTIONAL ACCESSORIES
STANDARD PACKAGE
* Design, standard/optional package and specification shown above are subject to change
with or without notice.
CATEGORY
MODEL
Q’TY
Arc fusion splicer
Battery
Battery adapter
Instructions for use
Spare electrode
Transporting case
Cooling tray
Screw driver
USB cable
Sleeve clamp
Cleaver
Manual stripper
Alcohol dispenser
Cleaning brush
Tweezer
Optical fiber holder
SWIFT KF4
KF-3400
FY1701000
—
EI-24
Hard case
CT-01 (40mm(1.5in))
LD-3300
—
SC-01
CS-01BT
CF-02
POM
—
—
1
1
1
1
1 pair
1
1
1
1
1
1
1
1
1
1
CATEGORY
SPECIFICATIONS
DESCRIPTION
Fiber alignment
Applicable type of fibres
Fiber count
Applicable fiber dimensions
Fiber setting and cleaved length
Splicing modes
Typical splice loss
Return loss
Splicing time
Splice loss estimate
Sleeve heating time
Applicable protection sleeve
Storage of splice result
Tension test
Operating condition
Storage condition
Dimension
Weight
Viewing method and display
Fiber view and magnification
Power supply
No. of splice cycles with battery
Electrode life
Blade life
Terminals
IPAAS, Active V-Groove Alignment
SM (G.652; MM (G.651); DS (G.653); NZDS (G.655); SM (G.657 A1, A2/B2, B3)
Single fiber
Cladding diameter: 125�m; Coating diameter: 150�m-3mm
7mm to 16mm (0.28in to 0.63in)
Splice mode: 300; Heat mode: 100
SM: 0.03dB; MM: 0.01dB; DS:0.05dB; NZDS:0.05dB
>60dB
Typical 7 sec. with SM
Available
Typical 13 sec. with IS-60 mode, IS-60 sleeve
40mm (2.4in); 60mm (1.5in) micro sleeve
Data: up to 5,000 ea; Image: up to 5,000 ea
1.96N to 2.25N
Altitude: 0-5,000m above sea level; Temperature: -10ºC~50ºC (-14ºF~122ºF);
Humidity: 0-95%; Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Temperature: -40ºC~80ºC (40ºF~176ºF); Humidity: 0-95%
124(W) x 189(L) x 75(H)mm (without rubber protector)
1.1kg (including battery)
2 AXIS Two CMOS cameras with 109mm (4.3in) color LCD monitor
X/Y: 130X; Max: 260X
Li-ion battery (DC 14.8V, 3400mAh); 100~240V AC charger
Typical 200 cycles
Up to 38,000 splices
Up to 77,000 cleaves
USB
4230 LBJ Freeway, Ste.149 | Dallas, TX 75244
Office: 972.556.0916 � Fax 972.910.8384
info�ame�icailsintec�.com � www.ame�icailsintec�.com
KF4
Active V-Groove Alignment
BENEFITS AND FEATURES
�emote �aintenance �ia �nte�net
��eal fo� �nte���ise� �ata �ente�� ��oa��an�
an� F��� netwo�� a��lication
�e�satilit� �������
�cti�e ����oo�e �li�nment � �et�o� �ccess
�etwo�� an� F��� � �ni�e�sal Fi�e� �ol�e�s
�i�e � �ei��t �������
�o�l��s most com�act �cti�e ����oo�e
Fusion ��lice�
�conom� O������
��e �est �ualit�� �u��et ��ice� � ma�e
e�e�� �enn� count
�om�ati�le wit� Fusion ��lice�On
�onnecto� �F�O�� in acco��ance wit� t�e
in�ust�ial stan�a��
KF4
Fusion Splice-On Connectors
Up to
38,000
ELECTRODE LIFE
Up to
75,000
ROTATING BLADE LIFE
3330 Earhart Drive, Suite 208
|
Carrollton, TX 75006
|
Office: 972.556.0916
|
Fax: 972.910.8384
|
uclswiftna.com
KF4
Rev. 221018R4
HS-250(Pair), HS-900(Pair),
LS-900L(Loose tube),
KF4-SC/FC, KF4-ILC
2.1.2
|
PRODUCT PACKAGE
CATEGORY
MODEL
Cleaver blade
Electrode
Work belt
Work table
Sleeve
SOC connector
External power
Optical fiber holder
BI-07
EI-24
WB-01
WK-02
S09-C, S09, S30-C, S30
SC, LC, FC, ST
DC 12V (available for car cigar jack)
HS-2.5, HS-IN, KF4-ST-01
OPTIONAL ACCESSORIES
STANDARD PACKAGE
* Design, standard/optional package and specification shown above are subject to change
with or without notice.
CATEGORY
MODEL
Q’TY
Arc fusion splicer
Battery
Battery adapter
Instructions for use
Spare electrode
Transporting case
Cooling tray
Screw driver
USB cable
Sleeve clamp
Cleaver
Manual stripper
Alcohol dispenser
Cleaning brush
Tweezer
Optical fiber holder
SWIFT KF4
KF-3400
FY1701000
—
EI-24
Hard case
CT-01 (40mm(1.5in))
LD-3300
—
SC-01
CS-01BT
CF-02
POM
—
—
1
1
1
1
1 pair
1
1
1
1
1
1
1
1
1
1
CATEGORY
SPECIFICATIONS
DESCRIPTION
Fiber alignment
Applicable type of fibres
Fiber count
Applicable fiber dimensions
Fiber setting and cleaved length
Splicing modes
Typical splice loss
Return loss
Splicing time
Splice loss estimate
Sleeve heating time
Applicable protection sleeve
Storage of splice result
Tension test
Operating condition
Storage condition
Dimension
Weight
Viewing method and display
Fiber view and magnification
Power supply
No. of splice cycles with battery
Electrode life
Blade life
Terminals
IPAAS, Active V-Groove Alignment
SM (G.652; MM (G.651); DS (G.653); NZDS (G.655); SM (G.657 A1, A2/B2, B3)
Single fiber
Cladding diameter: 125�m; Coating diameter: 150�m-3mm
7mm to 16mm (0.28in to 0.63in)
Splice mode: 300; Heat mode: 100
SM: 0.03dB; MM: 0.01dB; DS:0.05dB; NZDS:0.05dB
>60dB
Typical 7 sec. with SM
Available
Typical 13 sec. with IS-60 mode, IS-60 sleeve
40mm (2.4in); 60mm (1.5in) micro sleeve
Data: up to 5,000 ea; Image: up to 5,000 ea
1.96N to 2.25N
Altitude: 0-5,000m above sea level; Temperature: -10ºC~50ºC (-14ºF~122ºF);
Humidity: 0-95%; Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Temperature: -40ºC~80ºC (40ºF~176ºF); Humidity: 0-95%
124(W) x 189(L) x 75(H)mm (without rubber protector)
1.1kg (including battery)
2 AXIS Two CMOS cameras with 109mm (4.3in) color LCD monitor
X/Y: 130X; Max: 260X
Li-ion battery (DC 14.8V, 3400mAh); 100~240V AC charger
Typical 200 cycles
Up to 38,000 splices
Up to 77,000 cleaves
USB
4230 LBJ Freeway, Ste.149 | Dallas, TX 75244
Office: 972.556.0916 � Fax 972.910.8384
info�ame�icailsintec�.com � www.ame�icailsintec�.com
KF4
Active V-Groove Alignment
BENEFITS AND FEATURES
�emote �aintenance �ia �nte�net
��eal fo� �nte���ise� �ata �ente�� ��oa��an�
an� F��� netwo�� a��lication
�e�satilit� �������
�cti�e ����oo�e �li�nment � �et�o� �ccess
�etwo�� an� F��� � �ni�e�sal Fi�e� �ol�e�s
�i�e � �ei��t �������
�o�l��s most com�act �cti�e ����oo�e
Fusion ��lice�
�conom� O������
��e �est �ualit�� �u��et ��ice� � ma�e
e�e�� �enn� count
�om�ati�le wit� Fusion ��lice�On
�onnecto� �F�O�� in acco��ance wit� t�e
in�ust�ial stan�a��
KF4
Fusion Splice-On Connectors
Up to
38,000
ELECTRODE LIFE
Up to
75,000
ROTATING BLADE LIFE
3330 Earhart Drive, Suite 208
|
Carrollton, TX 75006
|
Office: 972.556.0916
|
Fax: 972.910.8384
|
uclswiftna.com
KF4
Rev. 221018R4
HS-250(Pair), HS-900(Pair),
LS-900L(Loose tube),
KF4-SC/FC, KF4-ILC
2.2.2
|
OPTIONAL ACCESSORIES
