Mr Bot 280
19
•
Place the "Calibration sheet" included in the package between the nozzle
and the print surface.
•
Turn the LCD’s knob. Counterclockwise the head descends and clockwise
rises.
•
At the same time, slightly move the "Calibration sheet" back and forth until
you feel a slight resistance as the paper is being pressed by the nozzle.
•
The properly adjusted distance between the nozzle and the print surface is
when you feel a slight friction of the nozzle pressing the "Calibration sheet".
•
When you select the appropriate distance, press the LCD’s knob to finish
the calibration process.
The printer is ready for use!
First print
The first step you need to do is to make sure the glass is clean, and then load the
printer with the filament.
Step 1
Before placing the filament spool on
the side of the printer, cut with a
scissors or with a pliers diagonally the
filament.
