Ublox ODIN-W2 Series, System Integration Manual

Page: 42 / 43

ODIN-W2 series - System integration manual
UBX-14040040 - R20 Revision history Page 42 of 43
C1-Public
Revision history
Revision Date Name Comments
R01 21-Apr-2015 fbro Initial release.
R02 15-Jul-2015 fbro Major updates.
R03 23-Sep-2015 fbro Major updates in all the sections. Updated the document status to Advance
information.
R04 29-Jan-2016 fbro Updated the document status to Early production information. Modified
Table 1 . Added section about Production testing. Rearranged sections to
align with other short range manuals. Moved Antenna list to ODIN-W2
Datasheet. Other minor updates.
R05 20-Jul-2016 mwej, fbro Updated to product version ODIN-W26x-01B-00. Updated key features of
the ODIN-W2 series (
Table 1 ). Added China and Taiwan approval info in
Qualifications and approvals section. Added compliance information for
Australia and New Zealand in Qualification and approvals section. Clarified
formation about DSR/DTR and SW0/SW1 in section
1.4.3 .
R06 30-Sept-2016 fbro, hwin Added information about GPIO pins (section 1.7 ). Added pin ID for GPIO
mapping in pin description (section 1.2.2 ). Added support for Firmware 3.0.0.
Removed information in Qualification and approvals chapter as this
information is provided in the ODIN-W2 series Datasheet.
R07 02-Dec-2016 fbro Added example on PHY implementation (section 1.5.2 ). Included mbed
information from ODIN-W2 SIM addendum mbed (section 1.5.3 ). Included a
new section for Software (Section 2 ) and Appendix C.
R08 03-Jan-2017 kgom Included support for ODIN-W2 firmware versions – 2.0.2 and 3.0.1. On page
2, replaced Document status with Disclosure restriction.
R09 30-Mar-2017 fbro, kgom Included support for ODIN-W2 firmware version 4.0.0. Updated Table 1.
R10 1-Sep-2017 fbro, kgom Included support for ODIN-W2 software version 4.0.1. Updated Table 1.
Replaced firmware with software.
R11 13-Sep-2017 apet, kgom Included Arm Mbed pin numbers in pin description for ODIN-W2 (Table 2).
R12 22-Dec-2017 ajah, kgom Included support for ODIN-W2 software version 5.0.0. Updated section 1.1.
Updated the note in section 1.6.1 to reflect support for 2x2 MIMO from
software version 5.0.0 onwards. Updated Production test (sections 6.1 and
6.2) with test and calibration information.
R13 26-Jan-2018 kgom Included support for ODIN-W2 software version 5.0.1.
R14 14-Mar-2018 apet, fbro Added information about test points to the pin list (Table 2). Added flashing
instructions for an Arm Mbed application (section 2.3).
R15 20-Jun-2018 kgom Included support for ODIN-W2 software version 6.0.0. Updated Table 1.
R16 14-Nov-2018 kgom Included support for ODIN-W2 software version 6.0.1.
R17 19-Dec-2019 fbro, mwej Added recommendation on N2 during soldering in section 4.3.2. Updated
applicable products table (page 2) with ODIN-W263 and removed obsolete
product variants. Updated product feature table (Table 1).
R18 22-Jan-2020 fbro Updated soldering instructions
R19 12-Jun-2020 lber Applicable product list updated.
Nitrogen soldering recommendations updated in section 4.3.2.
R20 21-Sep-2020 mlju Removed redundant data in revised Document information section.