EVK-W262U - User Guide
UBX-15020900 - R04
Getting started
Page 9 of 16
2.3.3
Get and set configuration
The Get All and Set All are used to get and set a complete configuration to the ODIN-W2.
Nothing will be stored in flash until the
Store
button is clicked. That will store the current configuration into
the flash of the ODIN-W2 and will be used when the module starts up after a reset. Some commands like
+UWSCA stores the settings without the need of using the
Store
button.
Use the
Factory
Button if you need a complete reset (of the configuration).
Figure 5: Main screen in s-center
