EVK-JODY-W3 - User guide
UBX-20030840 - R02
Appendix
Page 25 of 29
C1 – Public
Appendix
A
Known issues
The following issues are known with the latest version of the EVK.
•
The USB interface for Bluetooth does not work in the case of VIO=1.8 V, power supply over PCIe
and the USB cable plugged into the host before the host PCIe initialization. To work around this
issue, use external power supplies or plug the USB cable only after PCI initialization.
•
When using the EVK-JODY-W3 with NXP i.MX8 series platforms, the SDIO interface cannot be
used to draw the power for the module. To work around this issue, draw power through USB or
external power supplies.
•
Reset buttons SW500, SW501 are not working properly. This issue is to be addressed for the next
board revision.
For more information about known issues, recommendations and solutions, contact your local u-blox
support team.
