ANNA-B4 series - System integration manual
UBX-21000517 - R03
Contents
Page 58 of 74
C1-Public
8
Pre-approved antennas list
This chapter lists the external antennas that are pre-approved for use together with ANNA-B4 series
modules.
☞
Note that not all antennas are approved for use in all markets/regions.
⚠
Approvals are pending
8.1
Approved antennas
ANNA-B4 internal antenna
Gain
+0.5 dBi
Comment
Internal antenna on ANNA-B4.
The intenal antenna should not be mounted inside a metal enclosure.
Approval
FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
FXP75.07.0045B
Manufacturer Taoglas
Gain
+2.5 dBi
Impedance
50
Ω
Size
5.9 x 4.1 x 0.24 mm
Type
Patch, Flexfilm
Connector
U.FL.
Cable length
45 mm
Comment
For best performance, this antenna should be attached to a plastic enclosure
or part. It should be mounted on a U.FL connector and not inside a metal
enclosure. For more information, see antenna data sheet.
Approval
FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
FXP74.07.0100A
Manufacturer Taoglas
Gain
+4.0 dBi
Impedance
50
Ω
Size
47.0 x 7.0 x 0.1 mm
Type
Patch, Flexfilm
Connector
U.FL.
Cable length
100 mm
Comment
Should be attached to a plastic enclosure or part for best performance. For
more information, see antenna data sheet.
Should not be mounted inside a metal enclosure. To be mounted on a U.FL
connector.
Approval
RED, MIC, KCC, ANATEL, ACMA and ICASA