Ubisys H1, Manual

Page: 34 / 42

34 Heating Control H1
Chapter 5 | More Functions and Information
0°C
2021.09.30 00:00
10. The icon for „Finding/Binding“ appears with an arrow pointing
down.
11. Press the button to configure the device as a „Target“. In this case,
the device can receive „attribute reports“ from other devices.
If you want to cancel now, press the button. You will then return to
the menu mode.
5.6 Unmounting
In order to facilitate the disassembly, you should allow the ram of the H1 to retract. Proceed as follows for this:
Display
Button
Schraubring
Drehrad
Batterie-Schutzfolie
100 mm
55 mm
1. Press and hold the button for 10 seconds to enter the second
menu.
2. By operating the rotary dial you switch between the different menu
items.
0°C
2021.09.30 00:00
3. Turn the rotary dial until the symbol for „Unmount“ appears in the
display.
4. Press the button again to confirm the menu item.
5. The symbol flashes.
6. Press the button again to confirm.
7. You will hear the tappet of the H1 being retracted.
To cancel the operation (at 4. or 5.), operate the rotary dial.