Ubisys H1, Manual

Page: 18 / 42

18 Heating Control H1
Chapter 3 | Set Room Temperature
3.2 Switch off the heating – and switch on again
To switch off your heating with a „push of a button“ (e.g. when you leave the house for a longer period of time or
at the end of a heating period) proceed as follows:
1x + 1x
17:00
17:15
17°C
17:00
22:00
22°C
06:00
09:00
22°C
09:00
09:15
22°C
MON-SUN
6-9::22.0°C
9-17::17.0°C
MON-FRI,
SAT-SUN
MON, TUE,
WED, THU, FRI,
SAT, SUN
MON
0 6 12 18 24
MON
0 6 12 18 24
MON
0 6 12 18 24
00:00
00:00
7.0°C
1
06:00
09:00
22.0°C
1
09:00
09:15
22.0°C
2
1
09:00
17:00
17.0°C
2
1
06:00
09:00
22.0°C
3
2
06:00
09:00
22.0°C
3
2
1 1
06:00
09:00
22.0°C
3
2
1
1. Press the button to activate the display. Press the button again to
enter the first menu.
0°C
2021.09.30 00:00
2. Select the symbol for „Switch off“ by turning the rotary wheel and
press the button to confirm.
0°C
2021.09.30 00:00
3. A check mark will appear in the upper right corner and your heating
will now be switched off and will be in „frost protection“ (approx.
7°C).
The H1 is now in a kind of „sleep mode“ - but is still accessible
via the gateway. You may now still change the set temperature
in the app, but the device and thus the heating will not respond.
Only when you switch on the H1 again, the desired temperature
will be set.
Switch on heating again
Display
Button
Schraubring
Drehrad
Batterie-Schutzfolie
100 mm
55 mm
To turn your heater back on, simply set a new target temperature by
turning the dial.