ubiquoss U9016B, Installation Manual

Page: 25 / 46

U9016B Installation Guide 15
PON
OLT
Mounting on a Rack
U9016B
can be mounted onto a standard 19” rack. The following describes how to install
U9016B onto a rack:
1. Remove all the cables connected to the product and turn off the power.
2. Put the product on the floor or a firm table that is near the installation rack.
3. If another device is already installed on the rack, choose the location on the rack to install the
product onto by considering the product size below. Ensure to secure the space of 1U on the
top/bottom of the product.

U9016B size: 482X295X88.8(mm)
4. Two workers should work together to put the product with the rack brackets attached on the
installation site of the 19” rack.
5.
Align the rack brackets attached to the product and the holes of the 19” rack, and then fix the
product to the rack by using 4 binder head screws.
Note The binder head screws are not supplied with U9016B. For these, contact
the company that provided the 19” rack.
Caution Before installing the product onto the rack, check the stability of the rack
in order to prevent the incident such as the rack falls down after the
product installation or the rack fails to hold the product weight. In case of
installing the product onto an empty rack, use the bottom of the rack
first.