25.02.2020
PBE-5AC-500-ISO Qu ck Start Gu de
https://dl.ubnt.com/qsg/PBE-5AC-500-ISO/PBE-5AC-500-ISO_EN.html
3/20
Release Button
S gnal
Ethernet
Power
To reset to factory defaults, press and hold the Reset button for more than 10
seconds wh le the dev ce s powered on. Alternat vely, the dev ce may be reset
remotely v a a Reset button located on the bottom of the G gab t PoE Adapter.
After you assemble the PowerBeam, check the Release button; t should be fully
engaged n the Release Button Slot of the Rear Hous ng. Th s ensures that the
Antenna Feed s locked nto place. If you need to remove the Antenna Feed, you
must depress the Release button f rst.
LEDs
In a rOS®, you can mod fy the threshold value for the w reless s gnal strength LEDs
on the W reless tab under S gnal LED Thresholds. Each LED w ll l ght when the
w reless s gnal strength s equal to or greater than the LED’s threshold value. The
default threshold values for these LEDs are shown below:
The Ethernet LED w ll l ght steady blue when an act ve Ethernet connect on s made
and ash when there s act v ty.
PBE-5AC-500-ISO Qu ck Start Gu de
