background image

 

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722 

Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com 

©2015 M2 Antenna Systems Incoporated 

0722/11 

Rev.01 

Model  ......................................... 6M7JHV 
Frequency Range ....................... 50.0 To 50.4 MHz 

*

Gain .......................................... 13.0 dBi 

Front to back .............................. 25 dB Typical 
Beamwidth   ............................... E=40° H=42° 
Feed type ................................... “T” Match 
Feed Impedance. ....................... 50 Ohms Unbalanced

 

Maximum VSWR ........................ 1.2:1 Typical  
Input Connector .......................... “N” Female 

Power Handling .......................... 3 kW 
Boom Length / Dia ...................... 30’ 8” / 1-1/2” 
Maximum Element Length .......... 9’ 6” 
Turning Radius: .......................... 17’ 2” 
Stacking Distance ....................... 25’ High & 27’ Wide 
Mast Size .................................... 1-1/2” to 2” Nom. 
Wind area / Survival ................... 2.5 Sq. Ft. / 85 MPH 
Weight / Ship Wt. ........................ 18 Lbs. / 21 Lbs. 
 

M2 Antenna Systems, Inc. 

Model No: 6M7JHV 

FEATURES: 

           The 6M7JHV is a mid-sized 7 element antenna designed originally for the late Dave Batcho, N5JHV.  
The JHV's excellent gain is coupled with a very clean pattern for reducing local noise, making it ideal for long-
haul terrestrial and EME communications.  An outstanding performer by itself, the JHV also produces 17 dBd 
in an 4-bay array. Mechanical features include machined aluminum element-mounting blocks, O-ring sealed 
connectors and balun, silicone-gel sealed T- match block, and stainless steel hardware. Elements are 3/8 tube 
and DC grounded. The 1-1/2" boom breaks down into 5 ft sections for easy portability. An overhead guy sys-
tem provides additional boom support. It has become the standard of choice for HF/50 mHz DXpeditions.

 

SPECIFICATIONS: 

*Subtract 2.14 from dBi for dBd 

Summary of Contents for 6M7JHV







Reviews: