CommScope CMAX-DMF-43-UW-i53 Installation Manual Download

Page: 1 / 5

Installation Instruction for CMAX Antennas

Page 1

M0149ASB_Installation_CMAX-DMF-43-UW-i53_Antennas

Installation Guide for

CMAX-DMF-43-UW-i53 Antenna

Note:

Please read the complete description before starting the installation. Make sure

that connectors are properly sealed against water if no cables are connected to

them after installation.

1. Assembly

Fit these seven parts above together and fasten them with screws M6, nuts M6, spring

washers, and washers.

Screws Spring washer

M6 Nuts

Washer

Summary of Contents for CMAX-DMF-43-UW-i53

Page 1: ...ntenna Note Please read the complete description before starting the installation Make sure that connectors are properly sealed against water if no cables are connected to them after installation 1 Assembly Fit these seven parts above together and fasten them with screws M6 nuts M6 spring washers and washers Screws Spring washer M6 Nuts Washer ...

Page 2: ...e as a drill jig to mark 4 holes onto the wall as shown in the drawing above 2 Drill 4 holes into the wall and insert 4 expansion bolts into holes 3 Install the mounting kits to the expansion bolts and tighten the M6 nuts and flat washers 4 Attach the antenna to the mounting kits and then tighten the M4 nuts spring washers and flat washers ...

Page 3: ...Installation Instruction for CMAX Antennas Page 3 M0149ASB_Installation_CMAX DMF 43 UW i53_Antennas 3 Pole Mounting 28 60 mm pole diameter 28 60 mm ...

Page 4: ..._Antennas 4 Antenna Mounting 4 1 Antenna Mounting 4 2 Azimuth Angle 1 Loosen the fixing screw Do NOT unscrew it completely 2 Adjust your desired angle The complete antenna pedestal can be swiveled to the left right hand side by up to 60 3 Tighten the fixing screw M4 nut Washer Spring Washer ...