Mounting (Optional)
If the Power Cord is being used, the EtherMagic module may be
mounted for added stability.
1. Place the Mounting Bracket at the desired location with the
mounting tabs facing up, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket
using two fasteners (not included).
3. Align the slots on the EtherMagic module with the tabs of
the Mounting Bracket, and then slide the module down.
*640-00257-01*
640-00257-01
Summary of Contents for ETHERMAGIC EM-EP
Page 1: ...Gigabit Powerline System with 802 3af at or 24V Passive PoE Models EM S EM EP EM KIT ...
Page 4: ...Hardware Overview EtherMagic Switch LAN Port Reset Button Wall Plug Adapter LEDs Bottom View ...
Page 6: ...EtherMagic EndPoint PoE Port LEDs Wall Plug Adapter Top View Reset Button ...
Page 12: ...b Connect the Power Cord 3 Plug the EndPoint directly to an electrical outlet or ...
