Hardware Installation
For optimal performance, connect the EtherMagic Switch and
EndPoints directly to wall outlets of the same electrical circuit.
The Switch and EndPoints can be plugged in and mounted to
the outlets directly using the Wall Plug Adapter, or plugged in
using the optional Power Cord.
WARNING:
EtherMagic is for indoor use only. To reduce
the risk of fire or electric shock, do not expose the
EtherMagic modules to rain or moisture.
EtherMagic Switch Installation
1. Detach the Mounting Bracket from the Switch by sliding it
in the direction shown below.
Summary of Contents for ETHERMAGIC EM-EP
Page 1: ...Gigabit Powerline System with 802 3af at or 24V Passive PoE Models EM S EM EP EM KIT ...
Page 4: ...Hardware Overview EtherMagic Switch LAN Port Reset Button Wall Plug Adapter LEDs Bottom View ...
Page 6: ...EtherMagic EndPoint PoE Port LEDs Wall Plug Adapter Top View Reset Button ...
Page 12: ...b Connect the Power Cord 3 Plug the EndPoint directly to an electrical outlet or ...
