18.02.2020
AF-24 Qu ck Start Gu de
https://dl.ubnt.com/qsg/AF-24/AF-24_EN.html
6/26
10/100 Mbps, secured port for conf gurat on. By default, th s s the only port that
can mon tor, conf gure, and/or update f rmware.
* Short Flash (1:3 on/off cycle)
Normal Flash (1:1 on/off cycle)
Long Flash (3:1 on/off cycle)
Installat on Requ rements
17 mm wrench
13 mm socket wrench or dr ver
Clear l ne of s ght between a rF ber rad os
Clear v ew of the sky for proper GPS operat on
Mount ng locat on w th < 0.5° d splacement due to tw st and sway under w nd
load ng
Mount ng po nt:
At least 1 meter below the h ghest po nt on the structure
For tower nstallat ons, at least 3 meters below the top of the tower
Ground w res – m n. 8 AWG (10 mm ) and max. length: 1 meter. As a safety
precaut on, ground the a rF ber rad os to grounded masts, poles, towers, or
ground ng bars.
WARNING:
Fa lure to properly ground your a rF ber un ts w ll vo d your
warranty.
(Recommended) 2 Outdoor G gE PoE surge protectors
Note:
For gu del nes about ground ng and l ghtn ng protect on, follow your
local electr cal regulatory codes.
Outdoor, sh elded Category 5e (or above) cabl ng and sh elded RJ-45 connectors
should be used for all w red Ethernet connect ons. Category 6 s requ red for
nstallat ons w th long cable runs (up to 100 m).
We recommend that you protect your networks from harmful outdoor env ronments
and destruct ve ESD events w th ndustr al-grade, sh elded Ethernet cable from
Ub qu t . For more deta ls, v s t
Connect ng Power over Ethernet
1.
2
AF-24 Qu ck Start Gu de