RD-5G34*
* Requires Universal Bracket (included) or AF-5G-OMT-S45 Conversion Kit (not included).
Installation Requirements
Clear line of sight between airFiber radios
Clear view of the sky for proper GPS operation
Vertical mounting orientation
Mounting point:
At least 1 m below the highest point on the structure
For tower installations, at least 3 m below the top of the tower
Ground wires – min. 10 AWG (5 mm ) and max. length: 1 m. As a safety
precaution, ground the airFiber radio to grounded masts, poles, towers, or
grounding bars.
WARNING:
Failure to properly ground your airFiber radio will void your
warranty.
(Recommended) 2 Outdoor Gigabit PoE surge protectors
Note:
For guidelines about grounding and lightning protection, follow
your local electrical regulatory codes.
Outdoor, shielded Category 6 (or above) cabling and shielded RJ-45 connectors
are required for all wired Ethernet connections.
Hardware Overview
2
Summary of Contents for airFiber AF-5XHD
Page 13: ...Note Do not damage or remove the post on the Port Cover 2 3...
Page 14: ...4 Hardware Installation Installing the Ground Wire 1...
Page 16: ...2 3...
Page 17: ...4...
