Installation Overview
We recommend that you configure your paired AF-5XHD
radios before site installation. The overview below summarizes
the installation procedure, and the subsequent sections
provide detailed installation information.
• Connect the airFiber PoE Adapter to the DATA port, and
connect your computer to the MGMT port.
• Configure the AF-5XHD.
• Install a ground wire and mount the AF-5XHD on an
airFiber X or RocketDish antenna.
• At the installation site, install the airFiber X or RocketDish
antenna with the mounted AF-5XHD radio (see the antenna’s
Quick Start Guide for installation instructions).
• Secure the ground wire and mount the GPS antenna.
• Establish and optimize the RF link.
Connecting Power over Ethernet
1. Lift the release latch on the bottom of the AF-5XHD and
slide the Port Cover off.