4. The login screen will appear. Enter ubnt in the Username
and Password fields. Select your Country and Language.
You must agree to the Terms of Use to use the product.
Click Login.
Note:
U.S. product versions are locked to the U.S.
Country Code to ensure compliance with FCC
regulations.
5. Click the Wireless tab.
6. Configure the Basic Wireless Settings:
a. For one AF-5XHD, select AP PTP as the Wireless Mode.
For the other AF-5XHD, select CPE PTP as the Wireless
Mode.
b. Enter a name in the SSID field. This should be the same
on both the AP and the CPE.
c. Select USA for the Country code to ensure compliance
with FCC regulations.
d. Change the Distance Scale to be larger than the
anticipated distance between the AP and CPE.
e. If needed, change the Channel Width, Frequency,
Output Power (EIRP), Antenna Gain, and Maximum TX
Modulation settings. The Channel Width and Frequency
should be the same on both the AP and the CPE.
7. Configure the Wireless Security:
a. Select WPA2‑AES for the Security mode.
b. Select PSK for the WPA Authentication mode.
c. In the WPA Preshared Key field, enter a combination of
alphanumeric characters (0-9, A-Z, or a-z).
Note:
Currently only ASCII mode is supported.
8. Configure the Advanced wireless settings:
a. Enter the Duty Cycle on the AP.
b. Enter the Frame Length on both the AP and the CPE.
This should be the same on both the AP and the CPE.
9. Click Save Changes.