Note:
Do NOT make simultaneous adjustments on
the AP and CPE.
2.
CPE
Visually aim the CPE at the AP. To adjust the CPE’s
position, adjust the azimuth and elevation as described
in step 1.
3. Check to see if a link is established. Ensure that the LINK
LED is solidly lit green and the Signal LEDs of the CPE are
displaying signal levels.
4.
CPE
Aim the CPE at the AP to achieve the strongest signal
level on the AP.
Note:
Refer to the Signal LEDs section for details on
the signal values.
Note:
Maximum signal strength can best be
achieved by iteratively sweeping through both
azimuth and elevation.