3
Chapter 2: Installation
airCam
™
Mini User Guide
Ubiquiti Networks, Inc.
Chapter 2: Installation
Installation Overview
Your airCam Mini is pre-assembled at the factory and
is Plug and Play ready. If you do not plan on using the
optional microSD recording feature, skip to Step 2.
Hardware Installation
1. (Optional) Insert a microSD card into the slot on the
side of the camera until it locks into the slot.
To remove the microSD card, push the card in to release
the lock. Pull the card out.
Note:
Before removing the microSD card, follow
the steps under
“Removing the microSD Card”
on page 10
.
2. Connect an Ethernet cable to the Ethernet port located
on the back of the camera.
Connecting the Power
1. Connect the other end of the Ethernet cable to the
Ethernet port labeled
POE
on the
PoE Adapter
.
2. Connect an Ethernet cable from your LAN to the
Ethernet port labeled
LAN
on the
PoE Adapter
.
3. Connect the power cord to the power port on the
PoE
Adapter
. Connect the other end of the power cord to
a power outlet. The Power LED should light up on the
airCam Mini.
Hardware installation is complete.
