Configure the airFiber 5X Radio
Note:
The airFiber 5X radios must be running airOS®F
v3.2.1 or newer. The latest firmware is available at:
downloads.ubnt.com/airfiber
Each airFiber 5X radio must be preconfigured for use with the
airFiber NxN before installing them at the site. Configuration
details are available in the airFiber X User Guide, available at:
downloads.ubnt.com/airfiber
Enable airFiber NxN support on each radio:
1. Log into the airOS F Configuration Interface.
2. Click the Wireless tab.
3. Enter the additional Cable Loss value (dB):
a. 4.1 for the AF-MPx4, or
b. 7.2 for the AF-MPx8
4. For the NxN Radio setting, select Enable.
5. Click Change, and then click Apply.