airFiber X Compatibility
The airFiber NxN is designed for use with airFiber 5X radios,
(model AF-5X) and 5 GHz airFiber X or RocketDish
™
antennas.
Note:
The airFiber X Antenna OMT Conversion Kit
(AF-5G-OMT-S45) is highly recommended when using a
RocketDish for proper fitting and improved frequency
isolation.
Installation Requirements
• (2) airFiber 5X radios for AF-MPx4
• (4) airFiber 5X radios for AF-MPx8
• airFiber X or RocketDish antenna
• Clear view of the sky for proper GPS operation
• Ground wires – min. 10 AWG (5 mm
2
) and max. length:
1 m. As a safety precaution, ground the airFiber radios to
grounded masts, poles, towers, or grounding bars.
WARNING:
Failure to properly ground your
airFiber radio will void your warranty.
Note:
For guidelines about grounding and
lightning protection, follow your local electrical
regulatory codes.
• Outdoor, shielded Category 6 (or above) cabling and
shielded RJ-45 connectors are required for all wired
Ethernet connections.
