Installation Overview
We recommend that you configure your paired AF-3X radios
before site installation. The overview below summarizes the
installation procedure, and the subsequent sections provide
detailed installation information.
• Connect the airFiber PoE Adapter to the DATA port, and
connect your computer to the MGMT port.
• Configure the AF-3X.
• Install a ground wire and mount the AF-3X on an
airFiber X antenna.
• At the installation site, install the airFiber X antenna with the
mounted AF-3X radio (see the antenna’s Quick Start Guide
for installation instructions).
• Secure the ground wire and mount the GPS antenna.
• Establish and optimize the RF link.
Connecting Power over Ethernet
1. Lift the release latch on the bottom of the AF-3X and slide
the Port Cover off.
