4
© 2021 Ubicquia Inc. | All rights reserved. Patent pending. Public use approved. | 2058 v2 October 2021
3.7
Open the clamp with the swivel
locking nut up out of the way. If
your pole arm is smaller than 2.3/8”
(60.3 mm), you will install a clamp
insert set into the clamp. Clamp
inserts are available in 1.25” sizes,
and come as a set of two.
The inserts are clearly marked with
a numeral 1 or 2, denoting the
top clamp insert from the bottom
clamp insert. The inserts should
be placed into the corresponding
location in the clamp, ensuring a
complete fit. They should not be
loose after install. Move on when
the clamp inserts are firmly in
place.
4.1
Attach the provided grounding
cable to the UbiHub housing
using the grounding screw with
a standard screwdriver or 5/16”
socket. Note the location for the
safety tether attachment.
WARNING:
Ubicquia requires the
attachment of a safety tether to
both the device and the lift to
prevent accidental drops.
ALWAYS
wear safety gear
such as gloves and grounding
protection during installation.
4. Preinstall Grounding Cable