2
© 2021 Ubicquia Inc. | All rights reserved. Patent pending. Public use approved. | 2058 v2 October 2021
1.3
Package Contents
•
UbiHub Unit (with open cap
attached)
•
Mounting Clamp
•
Mounting Clamp Inserts (additional)
•
Dual-Camera
•
Grounding Cable
1.4
Required Tools (Not Included)
•
3/16” Hex bit driver / Wrench
•
Standard Screwdriver or 5/16”
Socket for grounding screw
•
Deep drive ½” Socket
•
Torque driver (capable of at min
40.in lb)
•
Grounding clamp, lug, or extra
length of grounding cable as
needed
•
Safety Tether (for ensuring device
safety during installation)
2. Unpacking the UbiHub
2.1
Open the top of the packaging as
indicated on the outside of the box.
Do not remove the UbiHub from
the box at this time.
2.2
Ensure that all items listed in the
package contents (ref 1.2) are
included in the box. If any item is
missing, e-mail support@ubicquia.
com or call 1.954.678.6191
(Monday through Friday 9am to
5pm EST).
2.3
Remove the mounting clamp
from foam insert and unwrap the
protective film. Caution: DO NOT
remove the UbiHub from the box
yet.
3. Preinstall Clamp
3.2
Mounting Clamp
The mounting clamp has inserts
available to fit 1.25” diameter
pole arms.
Without inserts, the mounting
clamp fits poles that are 2.3/8” in
diameter.
* Contact Ubicquia if you require a
clamp insert, but did not receive
a set.
3.1
Measure and Preinstall Clamp
The clamp fits a 2.3/8” (60.3
mm) diameter pole, with
optional replacement inserts
to accommodate for a smaller
pole diameter, and can be
adjusted between 6.04” -
10.57” (153.5-268.6 mm) for
horizontal travel along the
device, and between 1 7/8” - 3
7/8” (49-99mm) vertical travel
to accommodate pole distance.
