UBI EasyCoder 601 – Installation Instruction
4
DIN Connector
Cutter Unit
Hinges
Continued!
PAPER CUTTER KIT, cont'd.
❑
Fit the cutter unit to the vacant hinges from which you removed
the front hatch. Make sure that the locking plate snaps into the
groove of the right-hand hinge and that the angled plate at the
bottom of the cutter is inserted under the printer's bottom plate.
❑
Fit the cable from the cutter unit into the DIN connector above
the memory card slot on the printer's front.
❑
Tilt the cutter unit upwards until it locks into place. If the cutter
does not lock properly, the hinges of the cutter unit may need to
be adjusted using a #T10 Torx key.
Step-by-Step Instructions,
cont'd.