UBI EasyCoder 601 – Installation Instruction
3
PAPER CUTTER KIT, cont'd.
❑
Disconnect the LTS cable from connector P-606 at the upper
front corner of the CPU board.
❑
Loosen the #T10 Torx screw that holds the LTS bracket to the
front of the print unit and remove the LTS assembly. Be careful
not to damage the cable – you may want to put back the LTS later
or use it in another printer (it fits all EasyCoder 401/501/601
printers).
❑
Put back the left-hand cover plate.
Continued!
LTS
#T10 Torx Screw
Step-by-Step Instructions,
cont'd.
POWER ON
040700.04
FLASH
EPROM
232
CL
422
LTS
+
-
P-606
Disconnect LTS Here!