2
Appliance Specifications:
Model
Power Regulation
Range (W)
Suitable Area (m
2
)
HC09C15
240V~1500
18-22
Remarks: 1. Refer to the label on the appliance for the power supply.
2. The suitable area is only for your reference.
Mounting on the wall:
1.Fix bracket (c) to the wall using the plugs and screws provided.
2.Position to allow a minimum of 12” (30 cm) clearance from the base of the
heater to the floor and minimum 12” (30 cm) clearance from the top of heater to
the ceiling. Ensure that it is positioned at least 39” (1 m) from soft furnishings
and curtains. Position the bracket on the wall, at the desired location for the
heater. Mark the bracket holes on the wall. Drill holes on your wall according to
your marks, making sure that the diameter of the holes is suitable for screws.
Insert screws and mount the bracket. Place the heater on the bracket and lock it
with the locking sheet. Fix the locking sheet and bracket with the M4×8 screw
between them.
Lock sheet
M4× 8 Scr ew
B
A
D
C
>5
0c
m
>5
0c
m
Supply cord connection:
Warning: This convection heater must be used on a 240 V,
AC power supply and grounded outlets.
