Hardware Pack 3
DD
1/4"-20*0.6 Bolt
4 PCS
KK
1/4"-20 Hexagonal capped
nut
8 PCS
BB
1/4" Bigger flat washer
12 PCS
Fig.11:
Insert the Long side support bar (E3) & short side support bar (F3) into the corner pipe of bottom beam
of small top (A3 & A6) as figure
Fig.12:
Attach the assembled small top frame into the assembled big top frame as figure.
Fig.13:
Put the Connector of small top (G3) onto the Bottom beam of small top (A3 & A6) and fix them by using
bolt (DD) and washer (BB); then fix the pothook (M5) to the connector of small top (G3).
Fig.14:
Place the Roof cover of small top (C3 & D3) on the bottom beam of small top (A3 & A6); place the
Upper beam of small top (B3) on the Bottom beam of small top (A3 & A6), and fix them with nut (KK) & washer
(BB). Put the Top cover of small top (H3) on the Connector of small top (G3), then screw the Top decor (I3) on it.
Hardware Pack 4
BB
1/4" Bigger flat washer
96PCS
CC 1/4"-20*0.6
Bolt
72PCS
DD 1/4"-20*0.6
Bolt
24PCS
HH 5/16"X10.24
Peg
16PCS
II 1/4"-20X3.125
Anchor
16PCS
