![background image](http://html1.mh-extra.com/html/redverz/atacama-expedition-tent/atacama-expedition-tent_setup-instructions_1430253001.webp)
UNPACK TENT
CONTENTS:
•
Inner Tent & Outer Tent (arrive already clipped together).
•
Pole Bag (3 Tent Poles. 2 quantity red, long 2x11mm poles
and 1 quantity grey, short 1x9.5 mm pole).
•
Stake Bag (1).
UNROLL TENT
Face end marked ‘WIND’ into wind and peg this end,
one stake in each of the 2 black loops.
REMOVE POLES FROM THE POLE BAG
The Atacama Expedition Tent comes with 3 main poles, the two longer
red, larger diameter poles are for the garage end. The shorter grey pole
is for the sleeping area of the tent.
Assemble the Poles. Carefully unfold the shock corded sections and
allow them to slide together. Do not snap the pole sections together,
this will damage the poles. Make certain that the insert of each pole
section is fully inserted into the next section. Failure to do so may
cause your poles to crack.
Your Atacama Expedition Tent is easy to pitch and maintain. Follow these instructions
to set up your tent quickly, safely and easily. In order to familiarize yourself with your
new tent, we suggest that you test pitch it before setting off on an expedition.
•
Find a site that is even, protected from the wind and without any sharp objects.
•
Remove any sharp rocks or sticks that can damage your tent floor.
•
Avoid hollow spots where rain water can gather.
ATACAMA EXPEDITION TENT
- SET UP INSTRUCTIONS
1
3
2
WWW.REDVERZ.COM
DESIGNED IN DENVER, COLORADO
+1 720 213 8287