background image

WEATHERMASTER

™ 

17'X9'

1

Layout & Positioning of Tent

–Layout and position tent with door 

facing desired direction. (illus. 1)

–Stake down tent, starting with 

the corners. Do not stretch 
too tight. Angle the stakes 
slightly toward the tent.
(illus. 2) Keep the floor taut.

–Unzip the door.

2

Assemble & Place Roof Poles

–Assemble all shock-corded 

roof poles. When assembled will 
form a continuous arch with both 
ends pointing down. (illus. 3)

–Select center roof poles with

red stickers and square ends. Then 
insert them through the two center
roof sleeves. (illus. 4)

–Select end roof poles with

blue stickers and round ends. Then
insert them through the roof sleeves 
at each end of the tent. (illus. 4)

When You Are Ready To
Set Up Your Tent

–Select a level campsite clear 

of rocks, branches and other 
hard or sharp objects.

–Do not set up your tent 

under trees.

–For best results in windy 

conditions, position the end 
of tent into the wind.

–See owners manual for 

more tips

Center Curved Roof Poles 

(Red Sticker) Part No. 9232-302

End Curved Roof Poles 

(Blue Sticker) Part No. 9232-303

End Brace Poles

(Blue Sticker) Part No. 9232B305

Center  Brace Poles 

(Red Sticker) Part No. 9232B304

Awning Poles 

(Green Sticker) Part No. 9232-306

Rainfly  Part No. 9232D307

Instructions apply to Part Number 9232D179

illus. 3 Curved roof pole assembly.

illus. 4 Curved roof pole system shown 

inserted through pole sleeves. Square end, red 

sticker poles go into two center pole sleeves. Round end,

blue sticker poles go into two end pole sleeves.

illus. 2

Stake loops 

properly staked

Front door

Roof sleeve

illus. 1 

Pole sleeves

Shock corded poles

Forms an arch

Chain shock-corded

POLE ASSEMBLY PARTS

Reviews: