AA
1/4"-20*1 Hex bolt
8PCS
BB
1/4" Bigger flat washer
72 PCS
CC
1/4"-20*0.6 Hex bolt
16PCS
DD
1/4"-20*0.6 Bolt
32 PCS
EE
1/4"-20*2.125 Bolt
16 PCS
FF 1/4"-20
Nut 16
PCS
Hardware Pack 2
Fig.5: Attach the Top short panel (M2) to the Top long panel (L2) with bolt (AA) & washer (BB).
Fig.6: Fix the Top slanting bar (A2) onto the Corner connector (G1) with bolt (EE) & washer (BB) & nut (FF).
Fig.7: Fix Top slanting bar (A2) onto the assembled small top frame with bolt (CC) & washer (BB).
Fig.8: Fix the Middle beam of big top B2 (C2) onto the assembled Middle beam connector E1 with bolt (EE),
washer (BB) and nut (FF).
Fig.8-1:
Fix the Middle beam of big top (C2) onto the assembled small top frame (M2) with bolt (CC) & washer (BB).
Fig.8-2
˖
Fix the Middle beam of big top (B2) onto the assembled small top frame (L2) with bolt (CC) & washer (BB).
Fig.9:
Fix one end of the Left long support beam of big top long side (D2) onto the Middle beam of big top (B2) with
bolt (DD) & washer (BB).
Fig.10:
Fix the other end of the long support beam (D2) onto the Top slanting bar (A2) with bolt (DD) & washer (BB).
Use the same way to assemble E2, F2, G2, H2, I2, J2, and K2 respectively.
