background image

Ubee Interactive

3.8   Wireless

DDW3612 Subscriber User Guide • July, 2010

43

WEP Encryption

If you don’t have WPA(2)-aware wireless clients, then use 
WEP key encrypting. A higher bit key offers better security. 
WEP encryption scrambles the data transmitted between the 
wireless stations and the DDW3612 Wireless Cable Modem 
Gateway to keep network communications private. It encrypts 
unicast and multicast communications in a network. Both the 
wireless stations and the DDW3612 Wireless Cable Modem 
Gateway must use the same WEP key. Data Encryption can 
be set to WEP 

128-bit, 64-bit, 

or 

Disable.

 

Shared Key Authentication

Shared Key is an authentication method used by wireless 
LANs, which follow the IEEE 802.11 standard. Wireless 
devices authenticate each other by using a secret key 
that is kept by both devices.

802.1x Authentication

Enable to have the DDW3612 Wireless Cable Modem 
Gateway authenticate wireless clients.

Network Key 1-4

You can pre-define up to 4 keys for 64-bit or 128-bit (64-
bit keys require 10 hexadecimal digits) (128-bit key 
require 26 hexadecimal digits).

Current Network Key

You can select one of the four pre-defined keys as the 
current network key.

Passphrase

You can set WEP encryption key by entering a word or 
group of printable characters in the Passphrase box and 
click Generate WEP keys. These characters are case 
sensitive.

Generate WEP Keys

Force the wireless router to generate 4 WEP keys 
automatically.

Apply

Click to save the wireless configurations.

Automatic Security 
Configuration

Use this feature to setup WPS (Wifi Protected Setup) for 
devices connecting to the wireless network.

Device Name

Enter a name for this wireless cable modem for WPS.

PIN

Enter the Personal Identification Number for this wireless 
cable modem.

Configure

Click this button to apply the WPS-Device Name/PIN 
Setup.

WPS Add Client/Push 
Button/PIN

Select which method to have connecting wireless clients 
connect to the wireless network, Push Button or PIN. If 
PIN is selected, clients are required to enter the PIN in 
order to access the wireless cable modem. For push 
button, a client pushes a button, either on the device or in 
software on the device, and then on the wireless cable 
modem to establish secure communications.

Apply

Click Apply to save WPS configurations.

Label

Description

Summary of Contents for DDW3612







































































Reviews: