Notes
The frame is made of carbon fiber,
It is the owner’s responsibility to ensure this model is assembled correctly and
safely, Ensure that your model is capable of safely and reliably lifting the
payload you are asking it to. This model is dangerous if used in incorrect manner.
Ensure you seek assistance from an experienced flyer if you are unsure. Do not fly
near people, property or highways. Do not fly over people, property or highways.
There may be laws and regulations governing the use of this model in your area,
seek advice from your authourities if you are unsure.
Planning your build and installation is key to building a safe and reliable
multirotor. Make sure all wiring is of the correct gauge, properly connected, neat
and protected from wear/tear and radio/electrical interference. Make sure all
the components you use are suitable for the size and weight of your multirotor.
Do not over tighten screws, boomclamps can break
Check this product for damaged hardware, loose joints, missing parts or sharp
edges before and after assembly and frequently during use. Do not use unless all
components are correctly fitted and adjusted. Do not use if any parts are missing,
damaged or broken.
Assembly is required. Take care when unpacking and assembling. Kit contains small
parts and can have sharp edges
For replacement parts, ask your supplier of this frame or contact us.
Contact details :
Email :
Website : www.uavframe.com
