UAS SMOGHOG SHM-05C, Owner'S Manual

Page: 9 / 32

reV: 17f
SMoGHoG
®
SHM Series Models
5
61-10131
FIGURE 2
SHM Weights and Lifting Info
3.2 INSTALLATION PREPARATION AND
PLANNING
Prior to the actual installation of the SHM, the location
should be readied. this would include having an adequate
laydown area for all components, and access for the
crane, forklifts and other machinery. the unit will come
pre-assembled. the installation will include electrical
hook-up, and hanging, mounting, or securing the unit. an
electrical source, lighting and other equipment should be
readily available to aid in the installation.
in some cases engineering drawings of your specific
equipment and options will be provided. these and
all available documentation for your system should be
thoroughly reviewed prior to beginning any installation
work. this includes the unit and electrical controls. ensure
to leave an appropriate amount of room around your unit
to allow for maintenance and servicing. a minimum of
3 feet (1 m) of clearance is recommended for service in
front of the filter access door and 3 feet (1 m) for the rear
electrical access per nec.
ensure there is adequate access to the electrical
components with ducting installed.
3.3 DISCHARGE COMPONENT
INSTALLATION
ensure to position the unit so that the clean air discharge
is directed into an open area free of obstructions and with
consideration for personnel safety.