www.totemmaker.net
Totem MiniLab
Next, we’ll select serial port. Because the number of available serial ports differ from one
computer to another, and there’s no way to know which port is the correct TotemDuino
one, you might need to follow this procedure. First check what ports are available when
TotemDuino is disconnected, and compare the list once you connect TotemDuino back.
The newly appeared port will be the port that should be used. On most laptops there are
no extra serial ports, so you might see TotemDuino port as being the only one available.
!
Fig. 30 Selecting TotemDuino serial port
Once that’s done, we can start writing firmware for it. As always, its best to start with the
basics, so first we should try to upload a simplest firmware which only blinks the onboard
LED on the TotemDuino.
Using
File->Examples->01. Basics
drop-down menu select
Blink
example firmware:
!
of
!
25
31
