www.totemmaker.net
Totem MiniLab
!
Fig. 27 Selecting TotemDuino board port
One note regarding macOS compatibility is that it’s important to not unplug the device
while it’s being programmed. Doing so will cause the driver to get stuck, and further
connected TotemDuino boards will not show up until computer is restarted.
On most Linux systems driver for the TotemDuino should be included in the system
already, so no further steps are needed to be taken. If it’s missing, or the device doesn’t
enumerate when connected, refer to your distribution manual on how to enable PL2303
kernel module. Tested distributions that include the driver are Debian (and derivatives
such as Ubuntu) and Fedora.
Using Arduino IDE
After installation, you should be greeted by default Arduino IDE window:
!
of
!
23
31
