Piece counting
weighing
press and hold “PRINT”button under weighing interface, the display shows “0 PCS”and
, release the "PRINT" button
put
the
sample
quantity
which
has
been
set
in
SET-0.
press
“ON”
button
to
confirm
the
sample
weight,
and
start
weighing
.
If the same sample is used the second time, no re-sampling is required.
Long press “PRINT” button to exit the piece counting and return to the weighing mode.
Percent weighing
press and hold“PRINT”button under weighing interface, the display
show“0.00” and
, release the "PRINT" button
put the contrast target sample on the pan
(e.g. 100g weight), press “ON”button to
save the sample weight, the display shows
“100.00”.
If the same contrast is used the second time, no re-sampling is required
.
Long press “PRINT” button to exit the percent weighing and return to the weighing
mode.
Density determination (need gravity kit, optional)
density weighing
setting
press
and
hold
“ON”
b
u
tton,
the
balance
enter
s
into
the
main
menu
mode
.
when
the
display
shows“SET-d”,
release
the
button.
press and hold “PRINT”, enter into density weighing setting, the display shows “-dEn-*-”
press and hold“PRINT to set up density determination, display shows:
close density weighing
open solid density weighing
open liquid density weighing
press“TARE”to save and exit the setup, display shows W1 in the right corner
4. OPERATION
put
the
contrast
on
the
pan
(e.g.
5
0gweight),
the
figure
on
the
display
is
the
percentage
of
contrast
