Page 5
SKU 96524
For technical questions, please call 1-800-444-3353.
sEt up instructions
read the EntirE iMportant saFEtY inForMation sections at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
note:
For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
assembly
Using provided Nuts (2) and Bolts (4), attach Standing Blocks (3) to Standing
Brackets (1) for both sides of the engine Support. Tighten the Nuts (2).
Mount both Standing Brackets to Beam (5) with Wing Screws (7) and Washers
(6). Tighten the Wing Screws (7).
Insert the Support Screws (11) upwards through the Beam, add Large Washers
(9) and screw onto Handles (10).
Function
The engine Support is designed only to support the engine so that parts or
mechanisms underneath the engine, which normally have limited access, can be
reached.
opErating instructions
read the EntirE iMportant saFEtY inForMation sections at the
beginning of this manual including all text under subheadings therein
before use of this product.
general operating instructions
read the owner’s manual of the engine to be lifted to determine it’s lifting points.
Never try to move a running or hot engine. Allow sufficient time for the engine to
cool down entirely before beginning any operations.
Park the car on a flat surface, apply the parking brakes and check the wheels.
Loosen Wing Screws (7) and spread Standing Bracket (1), and locate rubber
cusions of the Standing Brackets over the lips adjacent to the fenders of the car.
Tighten the Wing Screws (7). Center the engine support bar assembly over the
engine.
Attach the Chains (12) to the engine at the appropriate lifting points, then loop
the Chains securely to the flange on the bottom of the Support Screws (11).
1.
2.
3.
1.
2.
3.
4.
5.
