Page 9
SKU 95834
For technical questions, please call 1-800-444-3353.
InSpEctIon, mAIntEnAncE, And cLEAnIng
1.
WARnIng!
Make sure the Fuel Ignition Cleaner is disconnected from an en-
gine and all pressure has been released from the tool before performing any in-
spection, maintenance, or cleaning procedures.
Before each use,
2.
inspect the general condition of the Fuel Ignition Cleaner.
Check for loose screws, misalignment or binding of moving parts, cracked or bro-
ken parts, damaged hose, and any other condition that may affect its safe opera-
tion. If a problem occurs, have the problem corrected before further use.
do not use damaged tools.
to clean,
3.
use a clean, damp cloth and mild detergent to clean the exterior of the
Fuel Ignition Cleaner. Then dry. Do not immersed any part in liquid. Do not use
solvents.
When storing,
4.
always store the Fuel Ignition Cleaner in a clean, dry, safe location
out of reach of children and other unauthorized people.
cAUtIon!
All maintenance, service, and repairs not mentioned in this manual must
only be performed by a qualified service technician.
TROUBLESHOOTING
problem
possible causes
probable Solutions
Fuel Injection Cleaner
does not work.
Loose connection(s).
1.
Improper air compressor PSI.
2.
Improper Air Regulator PSI.
3.
Canister empty of cleaning fluid.
4.
Recheck all connections.
1.
Set air compressor to proper PSI.
2.
Set Air Regulator to proper PSI.
3.
Refill Canister.
4.
pLEASE REAd thE FoLLoWIng cAREFULLY
THe mAnUFACTUReR AnD/oR DisTRiBUToR HAs pRoviDeD THe pARTs lisT AnD Assem
-
Bly DiAgRAm in THis mAnUAl As A ReFeRenCe Tool only. neiTHeR THe mAnUFACTUReR
oR DisTRiBUToR mAkes Any RepResenTATion oR wARRAnTy oF Any kinD To THe BUyeR
THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR
SHE IS qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER
AnD/oR DisTRiBUToR expRessly sTATes THAT All RepAiRs AnD pARTs ReplACemenTs
sHoUlD Be UnDeRTAken By CeRTiFieD AnD liCenseD TeCHniCiAns, AnD noT By THe
BUyeR. THe BUyeR AssUmes All Risk AnD liABiliTy ARising oUT oF His oR HeR RepAiRs
TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR
HER INSTALLATION OF REPLACEMENT PARTS THERETO.
