Page 7
SKU 95834
For technical questions, please call 1-800-444-3353.
Turn off the air compressor. Disconnect the air hose from the Elbow Fitting (8).
16.
Then turn (counterclockwise) the Air Regulator (7) to its full
opEn
position to re-
lease pressure in the Canister (6).
Disconnect the Coupler Socket (15) from the vehicle’s fuel port.
17.
Remove the block on the vehicle’s fuel return line or, if applicable, reconnect the
18.
vehicle’s fuel return line.
Store the Fuel Injection Cleaner in a clean, dry, safe location out of reach of chil-
19.
dren and other unauthorized people.
Start the vehicle’s engine, and check for fuel leaks.
20.
TO DECARBONIZE THE ENGINE CYLINDERS
Run the vehicle’s engine until the engine reaches normal operating temperature.
1.
Then, shut off the engine.
ELBOW FITTING (8)
AIR REgULAtoR (7)
cAnIStER (6)
pRESSURE gAUgE (5)
ShUt oFF VALVE (1)
DECARBONIZINE FITTING (21)
mAnIFoLd
VAcUUm
poRt
THROTTLE BODY OR CARBURETOR
IntAKE mAnIFoLd
EngInE
FIGURE B
2. Turn (counterclockwise) the Air Regulator (7) to its full
opEn
position.
(See Figure B.)
Connect the Coupler Socket (15) to the vehicle’s fuel port.
3.
ImpoRtAnt:
4.
Leave the Elbow Fitting (8) open. For this procedure, DO NOT con-
nect an air hose to the Elbow Fitting.
Turn (clockwise) the Shut Off Valve (1) to its
5.
oFF
position.
Remove the top of the Canister (6) and its Air Regulator (7). Fill the Canister with
6.
an approved decarbonizer (not included). Then, replace the Canister and Air
Regulator.
