U.S. Converters WF5000B, Setup Manual

Page: 25 / 49

www.usconverters.com
WF5000B
25
Copyrights © U.S. Converters LLC
The port will now open.
Enter a text string in the lower (send) window in AccessPort and click the AutoSend button. The
characters should now be sent via virtual COM 2, over WiFi to the WF5000B module, out on the TX pin,
back into the RX pin, back over WiFi, back into virtual COM port 2 and should appear in AccessPorts
upper (receive) window.
If you remove the jumper at the end of the serial cable connected to the WF5000B the data flow should
stop.
The WF5000B module obviously should be joining a network when performing this test.
Making this loopback test will confirm that the COM port has been successfully created and that the
WF5000B can send and receive data, ensuring that the module has been setup correctly.