U.S. Converters WF5000B, Setup Manual

Page: 27 / 49

www.usconverters.com
WF5000B
27
Copyrights © U.S. Converters LLC
Pairing two modules
The WF5000 can be configured to communicate in pairs between two serial ports, also called point-to-
point communication.
To be able to pair the modules the following settings must be used.
One unit must be configured as a server (in AP mode) and the other as a client (in STA mode). You can of
course choose different serial port settings, security, or IP address than shown below, however the
procedure as shown must be followed.