U.S. Converters WF5000B, Setup Manual

Page: 24 / 49

www.usconverters.com
WF5000B
24
Copyrights © U.S. Converters LLC
Making a loop-back test.
To verify if the WF5000B module is working properly and the ports has been successfully created you
can make a loop-back test.
Carefully use a paper clip or similar to jump the RX (pin 2) and TX (pin 3) pins at the end of the included
null modem cable and connect the cable to the WF5000B module’s DB9 connector.
Open AccessPort (can be downloaded for free from
U
http://www.usconverters.com
U
).
Configure AccessPort’s parameters to match the virtually created COM port (the COM port created by
the VCOM software), in this example COM 2, and click the OK button: