26
7.6 Check Before Copy
This setting checks if the
target devices’
are capable for
read and write.
Note
This function will modify
the flash media’s
content.
7.7 Power Off Time Between Copy+Compare
The use of this setting is highly advised as it prevents data
loss due to unstable flash. Users can set the time gap of
power supply between copy and compare. The time gap
can be set from 0 to 15 seconds. The default is "3".
7.8 Auto Start After Fill Device
Sets auto start of copy/compare task upon insertion of all
targets. Users can also choose to confirm tasks first by
pressing “Ok”.
7.9 Language
Sets the system’s
language. (English or Japanese)
7.10 CF Transfer Mode
(Available in CF/CFast Series)
There are 7 CF transfer mode options to choose from. The default setting is UDMA4, which
automatically adjusts the speed per your CF card. If unsure of the CF card’s quality, you can
manually reduce the transfer speed.
There are 7 transmission speed options:
⚫
PIO Mode 4
⚫
MDMA Mode 2
⚫
UDMA Mode 0
⚫
UDMA Mode 1
[Language]
English
[Select Speed]
UDMA Mode 4
[Check Before Copy]
Disable
[Power Off Time Between]
3
[Auto Start After Fill Device]
Yes, auto start
