7
Light emitting diode
LED
– bi-color light emitting diode
No connection to the Wi-Fi access point
- Yellow flashes
Wi-Fi module malfunction
–
Yellow lights steadily
Normal mode
o
No connection to the U-Prox IC L
– red flashes 2 times per
second
o
Connected to the U-Prox IC L
– green flashes once per second
Firmware upgrade - red flashes frequently
Repeater operation
The repeaters supplied unloaded with factory settings below in document. In this
state, the bi-color LED on the repeater flashes red twice per second. To make the
repeater work in access control system (ACS) you have to download a network
setting using the "Configurator" software and USB port or use the automatic
adjustment mode.
Repeater goes to the
“Normal” mode after downloading the configuration.
To return to the factory settings use the command from the U-Prox software or with
the routine described in Service Maintenance section.
In the Normal mode repeater processes information from U-Prox IP500 panels
received through the built-in wireless ISM band interface and transmits it to U-Prox
IC L through Wi-Fi and local computer network.
Communicator operation
U-Prox HW repeater operates automatically. After the download from the U-Prox IC
L the data from U-Prox IP500 wireless control repeaters processed and access
event messages are sent to the U-Prox IC L.
Repeater Communicator operates in
notification
mode that means that data
transmission to the U-Prox IC L is initiated on the access event.
U-Prox HW repeater connected to the computer network with wireless network (Wi-
Fi).
Both
local
enterprise computer network operation (see Fig.3) and
Internet network
(see Fig.4) operation via repeaters provided. This allows the distributed systems of
any scale construction.