QUICK START GUIDE
u-line.com
1. Press and Hold for 10 seconds
a.
0 1
will appear in the display
b. Remove access shield
c. Remove all ice in bin
d. Remove any ice protruding from the ice dispenser
tube.
2. Insert the end of the cleaning tube into the ice
dispenser; slowly pour in approximately 1 quart of
hot (min. 100º F) potable water. This will melt ice
inside the dispenser tube. It is normal for some water
to flow from the ice dispenser tube and exit from the
vent tube while pouring. Omit this step if no ice is in
the ice dispenser tube.
3. Press and release
a.
02
will appear in the display
b. Mix 4 ounces of SafeCLEAN Plus™ with 2 quarts of
potable water.
4. Wait until
03
appears in the display
a. Using the funnel and cleaning tube, slowly pour
3/4
of the cleaning solution into the dispenser
tube. Air and some water will exit the vent tube.
Remove cleaning tube.
b. Press and release
5
.
04
will appear in the display
a. The machine will circulate the solution, cleaning
and sanitizing the internal components, for
approximately 20 minutes.
b. While the machine is circulating the cleaning
solution, use
1/2
of the remaining cleaning solution
and a sponge to wipe down the inside of the ice bin
and scoop. Rinse with clean potable water.
Cl
Cleaning Tube
and Funnel
Ice
Dispenser
Tube
Vent Tube
6.
When
05
appears in the display, 3 soft tones will
sound, indicating the cleaning phase is complete
a. Remove and discard water filter if applicable by
rotating
1/4
turn counterclockwise.
b. Use the remaining cleaning solution to wipe the
manifold and surrounding area. Rinse with clean
potable water.
c. Using the hose and funnel, slowly pour 1.5 quarts
(48 oz.) of clean potable water into the ice
dispenser tube. Air and some water will exit the
vent tube.
d. Install new water filter. Press and rotate 1/4
turn
clockwise
e. Press and release
7.
06
will appear in the display
a. Reinstall shield and close door.
b. The machine will circulate water and perform
a series of final rinses for approximately 15
minutes.
c. The unit will resume making ice - indicated by 3
soft tones and
ICE
scrolling in the display.
d. Discard first 10 minutes of ice production.
Manifold
(Filter Models Only)
18